PixORD IP cammera P-400
cod: IP cammera P-400
MPEG-4 & MJPEG dual compression network camera
Internal microphone
Up to full D1 at 30 fps
Video out for connecting to monitors, DVRs etc
Supports DC iris lenses
Wireless networking IEEE 802.11G (optional)
System
32-Bit RISC Processor, 4MB Flash ROM, 32MB SDRAM
Video Compression
MPEG-4 Simple Profile (SP) / MJPEG, Dual Codec
Video Resolution
Full D1: NTSC = 720 x 480; PAL = 720 x 576
CIF: NTSC = 352 x 240; PAL = 352 x 288
QCIF: NTSC = 176 x 120; PAL = 176 x 144
Bit Rate
64K ~ 4M bits/sec (CBR/VBR configurable)
Frame Rate
Up to 30(NTSC) / 25(PAL)
Image Device
1/3” Sony SuperHAD CCD
Lens Type
CS mount, Fixed iris, Focal Length 6.0mm, F1.6; With DC-iris jack to support auto iris lens
Minimum Illumination
0.15 Lux at F1.2
Video Control
Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP)
size, Frame Sequence (I-Frame, I-Frame/P-Frame)
Image Adjustment
Brightness / Contrast / Saturation / Hue / BLC / AES
Event System
Trigger: GPIN, Motion detection
Action: GPOUT, FTP, Email and alert message
Network Interface
10/100 Base-T Ethernet
IEEE 802.11b/g wireless LAN (P-400W model)
Protocols
TCP(UDP)/IP, HTTP, FTP, Telnet, SMTP, DHCP, NTP, DDNS, RTSP, RTP/TCP(UDP)
Audio Capability
Built-in Microphone
Power Supply
AC/DC switching power adapter, input: AC100 ~240V, output: DC 12V/1.5A
Built-in PoE IEEE 802.3af (PoE model)
Power Consumption
7.4W / 8W (Wireless model) / 8.1W (PoE model)
Operation Temperature
5°C ~ 45°C
Operation Humidity
20% ~ 80% RHG
Dimension (L x W x H)
135mm x 85mm x 40mm (without wireless antenna)
Net Weight
430g (approximately)
I/O Connectors
1 x Mini-DIN for RS-485 / Photo-coupled GPIN / Relay GPOUT / Video out
1 x Reset hole to restore factory defaults
1 x RJ-45 Ethernet connector
2 x LEDs ((power/status)
2 x Antenna connectors (wireless model)
1 x DC In connector
Package Contents
1 x CD (manual and software)
1 x Ethernet cable
1 x Mini Din to Terminal block extend cable
1 x Stand for mount
1 x ACDC Power Adapter (Not included for PoE model)
2 x antennas (Wireless model)
1 x CS Ring Tool
